-
S355JR S355J2 S355J2H Seamess Square Rectangle Steel Tube
Name: Seamless Square/ Rectangle Steel tube
Standard: EN10210
Type: Hot rolled/cold rolled
Grade: S235/S275/S355(JR/J0/J2)
Thickness:0.5-40mm
Width: 10-800mm
Height:10-800mm
Tolerance: ±5%, ±1%, ±10%
Mill Test Certificate: EN10204 3.1
Processing: Cutting to shape/ Welding etc.
Standard: EN10210
-
S355JR S355J0 S355J2 S355K2 Low Alloy High Strength Steel Plate
Name： S355JR S355J0 S355J2 S355K2 Steel Plate
Standard: EN10025-2
Grade: S355JR S355J0 S355J2 S355K2
Thickness:1-300mm
Width: 30-3000mm
Tolerance: ±5%, ±1%,
Mill Test Certificate: EN10204 3.1
Processing: Cutting to shape/ Welding etc.
-
China NM400 NM450 NM500 Wear Resistant Steel Plate
Name： China NM400 NM450 NM500 Wear Resistant Steel Plate
Standard: GB/T 24168
Grades: NM360 NM400 NM450 NM500
Thickness:2-80mm
Width: 30-2500mm
Tolerance: ±5%, ±1%, ±10%
Mill Test Certificate: EN10204 3.1
Processing: Cutting to shape/ Welding etc.
-
AISI SAE 4130 steel coil palte sheet
Name： AISI SAE 4130 steel coil/plate/ sheet
Standard: ASTM A29/A29-M
Type: Hot rolled/cold rolled
Grade: 4130
Thickness:0.5-60mm
Width: 30-1500mm
Tolerance: ±5%, ±1%, ±10%
Mill Test Certificate: EN10204 3.1
Processing: Cutting to shape/ Welding etc.
-
6-300mm S355J2+N High Strength Structural Steel Plate
Name： S355J2+N High Strength Structural Steel Plate
Standard: EN10025-2
Grade: S355J2+N
Thickness:6-300mm
Width: 30-3000mm
Tolerance: ±5%, ±1%,
Mill Test Certificate: EN10204 3.1
Processing: Cutting to shape/ Welding etc.
-
Super thick steel plate cutting
Name： Super thick steel plate cutting to shape
Standard: ASTM AISI JIS DIN JIS GB EN etc
Grades: A36 S355JR S355J2 S355J0 S460Q S500Q S690QL S45C S60C etc
Thickness:10-300mm
Width: 30-1500mm
Tolerance: ±5%, ±1%, ±10%
Mill Test Certificate: EN10204 3.1
Processing: Cutting to shape/ Welding etc.
-
ASTM4130 SAE4140 4145H Steel Round Bar Steel Rod
4130 round steel bar has good work ability, minimal processing deformation, and excellent fatigue resistance. It belongs to the category of medium to high harden ability steel. After heat treatment, 4140 has good strength and comprehensive mechanical properties, good process ability, and high yield. The service temperature is 427 degrees Celsius.
-
ST52 ST52-3 S355JR S355J0 Solid shaft steel round bar
Name: ST52 ST52-3 S355JR S355J0 Solid shaft steel round bar
Type:Hot rolled/ Forged/Cold rolled
Grade: ST52 ST52-3 S355JR S355J0
Size: OD 6mm-1200mm
Condition: Hot rolled, Annealed/ QT/Forged
Mill Test Certificate: EN10204 3.1
Processing: Bending/ Cutting/Polished/Chrome Plated
-
S355J2 DIN 1.0577 ST52-3 Hot Rolled Structural Steel Round Bar
Name: S355J2 DIN 1.0577 ST52-3 Hot Rolled Structural Steel Round Bar
Type:Hot rolled/ Forged
Grade: S355J2 DIN 1.0577 ST52-32 (or Customer request)
Size: OD 6mm-1200mm
Condition: Hot rolled, Annealed/ QT/Forged
Mill Test Certificate: EN10204 3.1
Processing: Bending/ Cutting/Polished/Chrome Plated
-
AISI 4140 SCM440 DIN 42CrMo4 1.7225 Forged Alloy Steel Round Bar
AISI 4140 is defined as a low alloy steel which has 1% Cr-Mo as strengthening alloy elements.Compared with AISI 4130, it has a higher carbon content with good balance of strength, toughness ,abrasion and impact resistance and heat treatment capabilities,but poor in weld ability characteristics.AISI 4140 is generally supplied in quenched and tempered condition with hardness 28-32HRC.
-
SAE4340 Steel Round Bar ASTM4340 Steel Rod
The material of 4340 steel bar is alloy structural steel. Equivalent to German DIN steel grade 36CrNiMo4 , French NF standard 40NCD3, Japanese JIS standard SNCM439, British BS standard 816M40, American SAE/ASTM4340, American UNS standard G43400，China Standard
-
DIN 34crnimo6 steel round bar 1.6582 steel bar
34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN 10083-3:2006. 34CrNiMo6 steel has high strength, high toughness and good harden-ability.
34CrNiMo6 is applied in industries such as aviation, automotive, automotive, and national defense. 34CrNiMo6 can undergo heat treatment such as normalizing, tempering, and quenching. It is used to manufacture chains, screws, gears, arms, rollers, and various other mechanical parts.
STANDARD: EN/DIN 10083-3
